TIPTIG USA

The TIP TIG arc welding process is a unique hot wire TIG welding process for manual welding that uses our patented wire feed technology. Our system’s benefits will provide the highest quality, highest deposition rates with the lowest possible heat input. TIP TIG is consistently delivering the most excellent metallurgical results on any alloys. It has also proven to provide the lowest possible hexavalent chrome weld fume emissions, measured as undetectable.  

Up to 300% faster welding speeds compared to TIG welding
Up to 400% improvement in deposition rate
Dilution reduced by up to 80%
Dynamic wire feeding for a controllable weld pool even with positional welding
The wire feeding is superimposed in parallel using a backward/forward movement
Higher welding speed and easy handling
Perfect weld appearance, no weld spatters

Standard welding machines can be connected to the TIP TIG process. Our patented wire feed system introduces a vibration to the filler wire and as well as a pre heat to the filler material prior to entering the weld puddle. The vibratory effect comes from a mechanically applied agitation using a 4-roll wire drive unit. The hot wire current is created by a secondary power source within the TIP TIG wire feeder. The TIP TIG welding process is most beneficial on alloys like Carbon Steel, Stainless Steel, Duplex and Super Duplex Stainless Steels, Inconel, Stellite, Titanium, Hastelloy, Copper Nickel, Nickel Chrome Alloys and for Aluminum welding. The core application of the TIP TIG process is to attain higher travel speeds and increasing productivity of TIG welds using GTAW.

Hours Of Operation : Mon to Fri 9:00 am - 5:00 pm